| If hurricane bars were specified on the Rolling Shutter
Order Form they are included in the shipment with hurricane bars, brackets
and hardware.
Shutter Header The shutter header will only be included with a
rolling shutter that is to have hurricane bars installed.
Mount the header between the two vertical guide rails.
1. Secure the header to the shutter hood box.
2. Install the hurricane bar brackets to the header spaced to
the requirements of the local municipality.
3. Install the hurricane bars on the brackets.
4. Mark the location of the bottom brackets by letting the
hurricane bars hang from the header.
5. Install the bottom hurricane bar brackets.
|