| |
|
|
|
|
|
|
| 1.01 |
SUMMARY
|
|
|
|
|
| |
A. |
Section
includes exterior overhead coiling storm and
security shutters.
|
| |
2. |
Related
Sections
|
|
| |
|
1. |
Furniture
Lock cylinder |
| |
|
2. |
Division
No. 16 - Electrical: Electrical power, conduits,
field wiring and disconnect switches for motorized
shutters. |
| |
|
|
|
|
|
|
|
1.02 |
SUBMITTALS
|
|
|
|
| |
A. |
Procedure:
Comply with requirements the Submittal Procedures.
|
| |
2. |
Product
Data: Submit manufacturer's complete product
data for all specified components, including
specifications, finish information and installation
instructions.
|
| |
3. |
Shop
Drawings: Submit shop drawings showing layout,
sizes and types, product materials, components
and accessories, fabrication data, operation and
wiring diagrams for motor driven operators, finishes,
rough-in dimensions, anchorage and installation
requirements and details. |
| |
4. |
Samples:
Manufacture's standard selection of colors for
selection by the architect. |
| |
5. |
Quality
Assurance Submittals: |
| |
|
1. |
Test
Reports: Certified test reports showing compliance
with specified requirements.
|
| |
|
2. |
Certificates:
Manufacture's certification stating that design
criteria meets specified requirements. |
| |
|
3. |
Operating
and Maintenance Instructions: Submit detailed maintenance
requirements and operating instructions.
|
| |
|
4. |
Warranty:
Submit specified warranty documents. |
| |
|
|
|
|
|
|
| 1.03 |
QUALITY
ASSURANCE
|
| |
A. |
Installer
Qualifications: |
| |
|
1. |
Use
only manufacturer's factory trained installers
or qualified licensed installer approved by the
shutter manufacturer. |
| |
2. |
Regulatory
Requirements:
|
| |
|
1. |
Comply
with all local and governing code requirements. |
| |
|
2. |
Unless
required otherwise, fabricate to withstand wind
loads that carry same rating as component cladding
of the walls. |
| |
3. |
Pre-installation
Conference: Conduct a pre-installation meetingto
verify project installation and coordination requirements,
field conditions, and manufacture's instructions. |
| |
|
|
|
|
|
|
| 1.04 |
DELIVERY,
STORAGE AND HANDLING
|
| |
A. |
Procedure:
Comply with Product Delivery Requirements.
|
| |
2. |
Deliver
components in manufacturer's original, unopened,
undamaged containers with identification labels
intact. Store components protected from harmful
weather conditions and damage from other construction
activities.
|
| |
|
|
|
|
|
|
| 1.05 |
PROJECT
CONDITIONS
|
| |
A. |
Field
Measurements: Verify actual measurements of openings
by field measurements fabrication. Show recorded
measurements on shop drawings. |
| |
|
|
|
|
| 1.06 |
WARRANTY
|
|
|
|
| |
A. |
Manufacturer's
Warranty: Submit, for Owner's Acceptance, manufacturer's
standard warranty document executed by an authorized
company official.
|
| |
|
1. |
Warranty
period: ______years. |
| |
|
|
|
|
|
|
| (Specifier
Note: Refer to manufacturer's product data and/or
consult with manufacturer's representative for
warranty information/requirements). |
| |
|
|
|
|
|
|
| PART
2 - PRODUCTS |
| |
|
|
|
|
|
|
| (Specifier
Note: Typically in the following, where items occur
in brackets [ ] select the product appropriate
for the project being specified). |
| |
|
|
|
|
|
|
| 2.01 |
MANUFACTURER
|
| |
A. |
ACC
MANUFACTURING, LLC
1300 LAKE WASHINGTON ROAD
MELBOURNE, FL 32935
Ph: (877) 422-2634
FAX: (941) 274-3881 |
| |
|
|
|
|
|
|
| 2.02 |
MATERIALS
|
| |
A. |
Shutter
Components |
| |
|
1. |
Slat
Types |
| |
|
|
a. |
Aluminum
Foam-Filled Slats: Aluminum, 3004 H16 alloy, with
a polyurethane foam insulation core. [RC40], 40mm
profile; [RC55], 55mm profile; [SAR155a], 55mm
profile, high-density foam. Color [White] [Ivory]
[Bronze], factory applied finish. |
| |
|
|
b. |
Extruded
Aluminum Slats: Aluminum, 6063-T5 Aluminum Alloy.
[RE1000], [RE1500], [RE3000], all self-locking
slats. Color [White] [Ivory] [Bronze] [Clear Anodized],
chromium plated primer coat, powder coat finish. |
| |
|
2. |
Operation:
[Manual] or [Motorized] |
| |
|
|
a. |
Manual
operator type: [Pull Strap] [Gear, Universal and
removable handle] |
| |
|
|
b. |
Motorized:
110v/60hz, UL approved motors and controllers.
Provide manual override capability allowing manual
operation in case of power outage.
(Specifier Note: Manual override capability is an optional feature,
delete if not required. Motors will be selected to the size and dimensions
of the shutter to be operated.) |
| |
|
3. |
End
Caps: Die-Cast Aluminum [4] or [5] sided. |
| |
|
4. |
Shutter
Hood: Roll formed aluminum; .036 inch thickness,
3105-H14 alloy. [4] or [5] sided. |
| |
|
5. |
Tracks:
Extruded Aluminum 6063-T5 alloy. Manufacture will
match the appropriate Rail Guides with the slat
type to ensure proper slat retention. |
| |
|
6. |
Storm
Bars: Extruded Aluminum 6063-T5 alloy. [2-inch]
[3-inch] [4-inch]. |
| |
|
7. |
Spring/Security
Straps: Stainless Steel straps to join the slats
to the reel. |
| |
|
8. |
Reel:
6063-T6 Aluminum Alloy. |
| |
|
|
|
|
|
|
| 2.03 |
SHOP
FINISH
|
| |
A. |
Hood
and Track: (Electrostatically Applied - ESP- paint
Finish. |
| |
2. |
Tracks:
(Electrostatically Applied - ESP- paint Finish. |
| |
3. |
Color:
As selected by the architect. |
| |
|
|
|
|
|
|
| 3.01 |
EXAMINATION
|
| |
A. |
Verify
condition of substrates to determine if acceptable
for shutter installation in accordance with manufacturer's
instructions. Correct all unsatisfactory conditions
prior to commencing shutter installations. |
| |
|
|
|
|
|
|
| 3.02 |
INSTALLATION
|
| |
A. |
Install
track and all shutter components to comply with
project shop drawings and manufacturer's written
installation requirements. |
| |
|
1. |
Where
metal surfaces are in contact with masonry, concrete
or dissimilar metals, protect per the manufacturer's
installation procedures with recommended isolation
coatings or tape. |
| |
2. |
After
installation, lubricate, test and adjust shutters
to ensure proper operation. |
| |
|
|
|
|
|
|
| 3.03 |
CLEANING
|
| |
A. |
Clean
installed components in accordance with manufacturer's
instructions prior to Owner's acceptance. Properly
remove for the site all debris remaining from the
installation. |
| |
|
|
|
|
|
|
| 3.04 |
PROTECTION
|
| |
A. |
Comply
with manufacturer's recommendation and protect
completed shutter installations from damage during
remaining construction so as not to void the warranty. |
| |
|
|
|
|
|
|
|
END
OF SECTION
|
